Door Kick Guards for 2026+ BYD ATTO 3 – Carbon Fiber Style ABS Plates, Set of 4

Every ATTO 3 owner knows the pattern: the lower door cards collect shoe scuffs, white sole marks and muddy kick prints faster than any other surface in the car. These four molded guards cap that whole zone in carbon-fiber style — the kicks land on the guard, wipe off in seconds, and the door card underneath stays factory-fresh.

The set is shaped for the 2026+ ATTO 3's door cards, following the lower panel's full curve — including the sweep of the car's signature guitar-string door design, which stays visible in relief through the guard's molded lines. Each guard is a rigid ABS plate with the carbon weave texture finished into its surface and a small inset BYD badge, bonded to the door card with adhesive backing. Four pieces, one for every door, front pair and rear pair each shaped for its own doors.

• The scuff zone gets armor — the lower third of the door card is where shoes swing in and out, where kids' feet land, and where the door pocket gets kicked reaching for the handle. The guards cover that entire area, edge to edge.
• Marks wipe off instead of soaking in — the ATTO 3's original door card texture holds onto sole rubber and mud. The guard's hard, smooth carbon-texture surface releases them with one pass of a damp cloth, as the photos show.
• They look like they belong — the plates follow the door card's own sculpted lines, including the guitar-string motif molded into the ATTO 3's doors, and carry the carbon weave finish in the same gloss family as the cabin's other trim. Guests read them as factory sport trim, not protection film.
• Rigid plates, not stickers — these are formed ABS shells that hold the door's 3D curve permanently. They cannot bubble, peel at the corners or shrink back the way adhesive film does in a hot cabin.
• Existing scuffs disappear too — if your door cards are already marked, the guards cover the damage outright and reset the doors to a clean, uniform finish.

• Four door-specific pieces: front-left, front-right, rear-left and rear-right. The front pair is the larger, longer sweep; the rear pair is cut shorter and higher for the rear doors' different card shape.
• Carbon fiber style finish, stated plainly: the plates are ABS with the carbon weave produced by water-transfer printing and sealed in the surface — a carbon-fiber look with the toughness and price of ABS, not a laid carbon panel.
• Molded relief detail: the flowing lines of the ATTO 3 door design are reproduced in the plate, plus a small recessed BYD badge on each front guard.
• Full-coverage footprint: each plate runs the full length of the lower door card, from the speaker area back to the rear edge, so the whole kick zone is behind ABS.

• Vehicle: BYD ATTO 3 (Yuan PLUS)
• Model years: 2026 and newer — molded for the current ATTO 3 door card design
• Positions: lower inner panel of all four doors
• Quantity: 4 plates — one complete set dresses the whole car
• Steering layout: door cards are identical on LHD and RHD cars; the set fits both

1. Clean the lower door card thoroughly and let it dry — the surface must be free of dust, mud and silicone interior dressing for a full-strength bond.
2. Match each plate to its door (the larger pair is the front) and dry-fit it: the plate's curve keys against the door card's shape in one position.
3. Peel the adhesive backing, align the plate from one end, and press it home across its whole surface.
4. Repeat on the other three doors. Leave interior cleaners off the plates for 24 hours while the adhesive reaches full strength.

• Material: rigid molded ABS
• Finish: carbon fiber texture, water-transfer printed, gloss surface
• Color: black carbon weave
• Pieces: 4 (front pair + rear pair)
• Attachment: adhesive backing, full rear face
• Care: wipe with a damp cloth or wash with car shampoo — scuffs and sole marks come straight off the hard surface

Are these stickers or solid plates?
Solid plates. Each guard is a rigid ABS molding that holds the door card's curve by itself before it ever touches the car — that rigidity is why it cannot bubble or lift like a vinyl sticker, and why a kick that would dent film just bounces off.

Is it real carbon fiber?
No — and the construction is better suited to this job. The plates are ABS with the carbon weave water-transfer printed and sealed into the surface, giving the carbon look with ABS's impact toughness at this price point.

Do all four doors get one?
Yes. The set carries a shaped plate for each door; the front pair and rear pair are different shapes because the door cards are different shapes.

My door cards are already scuffed. Is it too late?
It is the ideal time. The plates cover the marked area completely, so the doors come out looking uniform and new — and from that day the marks land on the guards instead.

Will they interfere with the door speaker or the door pocket?
No. The plates are molded around the lower card's contours and stop below the pocket opening; the speaker area and storage pocket remain fully usable, as the installed photos show.

Can they come off when I sell the car?
Yes — warm a plate gently, work it away from one corner, and clean off any adhesive residue. The door card underneath has been protected the whole time, which is exactly what the next owner wants to see.

Standard worldwide shipping is $9.90 USD on orders below $29.90 USD. Orders of $29.90 USD or more ship free with standard shipping. Return requests can be submitted within 30 days after delivery — see our Returns & Refunds policy for the full terms.

BYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.