Tempered Glass Screen Protector for BYD ATTO 3, SEAL, DOLPHIN, SHARK 6 & SEALION 8 – 9H Center Touchscreen Guard, Clear or Matte Anti-Glare Finish

Your BYD runs everything through one big touchscreen — navigation, climate, media, cameras — and that screen takes every tap, ring knock, fingernail and cleaning-cloth swipe. This model-cut tempered glass protector takes the damage instead, and when it has served its time you peel it off to a pristine display underneath.

One protector, cut for your exact model. Choose the finish that suits your driving: crystal-clear HD Clear keeps the display exactly as BYD shipped it, while frosted Matte Anti-Glare cuts windscreen reflections and fingerprints for drivers who spend their days in bright sun.

• 9H tempered glass hardness — the glass surface resists scratches from keys, rings, coins and gritty cloths, and spreads the force of knocks instead of passing it to the display underneath.
• Cut for your model, not cut to fit — each variant is laser-cut to the centre touchscreen of one model, edge to edge, so there is no overhang, no trimming and no lifting corner.
• Two finishes, one decision — Clear for maximum brightness and colour fidelity; Matte for glare-free reading in direct sunlight and far fewer visible fingerprints.
• Touch stays exactly as factory — the thin glass bonds flat against the screen, so taps, swipes, pinches and the screen rotation gesture register exactly as they do on the bare display.
• Fingerprints wipe away — an oleophobic surface coating means smudges and skin oil sit lightly on the glass and clear with one pass of the included microfiber cloth.
• Cheap insurance for an expensive screen — replacing a scratched or cracked factory touchscreen costs a multiple of this protector; fitting one now keeps the cabin looking new at resale time.

• Tempered glass, rounded edges — smooth 2.5D rounded edges sit flush against the display with no sharp lip to catch a cloth or a fingernail.
• Matte finish, honestly described — the Matte variant uses a frosted surface that diffuses reflections. It trades a small amount of punch for glare-free readability in sunlight; drivers who want the brightest, most colour-accurate picture should choose Clear.
• Clear finish, no tint — the Clear variant adds no colour cast and no dimming layer, so navigation colours and camera images look exactly as BYD intended.
• Static-clean adhesion — the protector lays itself down from one edge once aligned, pushing air out ahead of it. No glue, no liquid, nothing to cure.
• Example photos show the SEAL fitment — the cut, edge shape and finish are the same across models; only the outline changes to match each model's screen.

Each order contains 1 protector for the centre touchscreen of the model selected. It does not cover the instrument cluster behind the steering wheel or any passenger display.

• BYD ATTO 3 / YUAN PLUS — 12.8-inch rotating centre touchscreen
• BYD SEAL — 15.6-inch rotating centre touchscreen
• BYD DOLPHIN — 12.8-inch rotating centre touchscreen
• BYD SHARK 6 — 12.8-inch centre touchscreen
• BYD SEALION 8 — 15.6-inch fixed centre touchscreen

Select your model and your finish from the variant menu before checkout. If your ATTO 3 has the fixed 15.6-inch screen fitted to the later Atto 3 Evo, the ATTO 3 variant on this listing is not the cut for that screen — it is cut for the 12.8-inch rotating screen.

1. Power the screen off and wipe it clean with the included alcohol wipe, then the microfiber cloth.
2. Lift any remaining dust with the dust-removal sticker — one speck under the glass becomes a visible bubble.
3. Peel the backing, align the protector with the screen edges, and lay it down from one edge, letting it settle across the display.
4. Press the centre lightly and work outward with the cloth; any small bubbles at the edges clear with a firm pass of the cloth.
5. Power the screen back on and run through a tap, a swipe and a rotation gesture to confirm full touch response.

• Material: 9H tempered glass with oleophobic coating
• Finishes: HD Clear or frosted Matte Anti-Glare
• Coverage: centre touchscreen only, edge-to-edge laser cut per model
• Quantity: 1 protector per order
• In the box: 1 tempered glass protector, 1 alcohol cleaning wipe, 1 microfiber cloth, 1 dust-removal sticker, fitting guide

Does it cover the small screen behind the steering wheel?
No. This listing covers the centre touchscreen only. The instrument cluster uses a different shape and is not included.

Clear or Matte — which should I choose?
Choose Clear if you want the display to look exactly as it does now, with maximum brightness and colour. Choose Matte if glare and fingerprints bother you — it kills reflections in bright sun and hides smudges, at a small cost to colour punch.

Does the protector slow down touch or block screen rotation?
No. The glass is thin and bonds flat to the display, so taps, swipes, pinches and the rotation gesture work exactly as before fitting.

What if I get a bubble during fitting?
Lift the nearest corner gently before pressing the glass fully down, re-lay it, and press from the centre outward with the cloth. Bubbles caused by trapped dust clear once the speck is lifted with the dust-removal sticker and the glass is re-laid.

Can I remove it later?
Yes. Lift a corner and peel it away slowly; the screen underneath is left clean and undamaged, ready for a fresh protector.

My ATTO 3 is the later Evo with a fixed 15.6-inch screen. Does the ATTO 3 variant fit it?
No — the ATTO 3 variant here is cut for the 12.8-inch rotating screen. The Evo fixed screen needs a different cut, so do not order this variant for that car.

Does the Matte finish make the screen look dull?
Matte softens reflections by diffusing light, which is exactly what makes it readable in sunlight. Colours stay clear and navigation stays easy to read; only drivers who want maximum colour punch should pick Clear instead.

Orders under $29.90 ship for a flat $9.90; orders of $29.90 and over ship free. 30-day returns: if the protector arrives damaged or does not match the model you selected, contact us within 30 days for a replacement or refund.

BYD, ATTO 3, SEAL, DOLPHIN, SHARK 6 and SEALION 8 are trademarks of their respective owners. BYD SPOT is an independent retailer and is not affiliated with BYD Company.