Tempered Glass Screen Protector for BYD ATTO 2 DM-i – 15.6-inch Center Screen, Glossy or Matte

The ATTO 2 DM-i runs its whole cabin through one 15.6-inch touchscreen — navigation, climate, media, vehicle settings. One scratch across that glass lives in front of you on every drive. This tempered glass protector takes the damage instead, and its alignment tray makes fitting it a 30-second, bubble-free job.

The glass is precision-cut for the ATTO 2 DM-i's 15.6-inch center screen and arrives in an auto-align installation tray: seat the tray over the screen, press and slide, wait 30 seconds, lift the tray away. The tray registers the glass to the screen's edges for you, so there is no eyeballing alignment, no re-lifting to chase bubbles, and no dust trapped by a slow, fiddly fit. Choose the glossy finish for a crystal-clear factory look, or the matte finish to kill reflections and hide fingerprints — both are the same 9H tempered glass underneath.

• The tray does the skilled part — screen protectors fail at installation, not in use. The printed three steps on the tray — press & slide, wait 30 seconds, remove — are the whole process. The frame aligns the glass, the slide action lays it down evenly, and the bond spreads without the bubble-chasing that ruins ordinary protectors.
• 9H tempered glass, not a plastic film — keys, rings, charging cables and fingernails meet a rigid glass shield rated at 9H surface hardness. It takes scratches and knocks that would mark the screen itself, and if it ever takes a hit hard enough to crack, the protector cracks — the expensive display underneath does not.
• Touch stays exactly as responsive — the glass is thin enough that taps, swipes and pinch gestures register precisely through it, and the BYD screen's rotation works as normal with the protector fitted. Nothing about using the car changes; only the risk does.
• Two finishes for two kinds of drivers — glossy keeps the screen's original deep-black, high-clarity look. Matte adds an anti-glare surface that stops the screen turning into a mirror in bright sun and makes fingerprints far less visible between cleans.
• A complete kit in the box — alignment tray with the glass pre-seated, cleaning and dust-removal auxiliary kit, and a squeegee card — everything shown in the kit photo is included, so the job is done in one sitting with nothing else to buy.

• Center Screen 15.6-inch / Glossy ($29.99): maximum clarity and color depth. The screen looks exactly as it left the factory — deep blacks, sharp text, glossy finish — with the glass layer invisible in daily use. Choose glossy if your car lives in shaded parking or you simply want the original look, protected.
• Center Screen 15.6-inch / Matte ($29.99): an anti-glare matte surface over the same tempered glass. It breaks up reflections from the windscreen and sunroof, keeps navigation readable in direct sun, and fingerprints wipe off less often because the matte texture shows far less of them. Choose matte if you drive in bright conditions or dislike seeing smudges on the screen.
• Both options fit the same 15.6-inch center screen and use the same alignment tray installation.

• Full-face coverage: the glass is cut to the 15.6-inch display's outline, covering the working surface edge to edge while the tray's frame keeps it registered during fitting.
• Auto-align tray: the clear frame seats over the screen with TOP markers for orientation; the blue press-and-slide strip drives the bond across the glass in one motion.
• Anti-fingerprint surface: an oleophobic-style coating lets skin oils wipe away in one pass with a dry cloth instead of smearing across the display.
• Case-safe rigidity: tempered glass holds its shape during fitting — no flopping film, no static-cling dust attraction while you position it.

• Vehicle: BYD ATTO 2 DM-i
• Screen: 15.6-inch center touchscreen
• Finishes: Glossy or Matte — select above
• Quantity: 1 protector with installation tray and kit

1. Clean the screen with the included auxiliary kit — wipe it down and lift off every speck of dust; the glass going on is the last thing that touches the surface.
2. Seat the alignment tray over the screen with the TOP markers at the top, glass side down.
3. Press and slide along the blue strip as printed on the tray — this lays the glass down evenly across the display.
4. Wait 30 seconds while the bond spreads and settles.
5. Lift the tray away from the marked corner, run the included squeegee card over any remaining micro-bubbles at the edges, and you are done. Use the touchscreen exactly as before.

• Material: tempered glass, 9H surface hardness
• Screen size: 15.6-inch center display, BYD ATTO 2 DM-i
• Finishes: Glossy (high clarity) or Matte (anti-glare)
• Installation system: auto-align tray — press & slide, 30-second set, remove
• In the box: 1 × tempered glass protector pre-seated in alignment tray, cleaning/dust-removal auxiliary kit, squeegee card
• Care: wipe with a dry or lightly damp microfiber cloth; fingerprints lift off the coated surface in one pass

Glossy or matte — which should I pick?
Pick glossy for the factory look: full clarity, full color, invisible protection. Pick matte if reflections bother you — it cuts glare in bright sun and hides fingerprints far better, at the cost of a very slight softening of the image, the same trade-off as a matte laptop screen. Both are the same glass, the same tray and the same protection; it is purely a surface finish choice.

Will it affect touch sensitivity or the rotating screen?
No. The glass is thin and fully bonded to the display, so taps, swipes and gestures register exactly as they do on the bare screen, and the ATTO 2 DM-i's screen rotation operates as normal with the protector in place.

I always get bubbles with screen protectors. Is this different?
Yes — that is the point of the tray. The frame registers the glass to the screen before it touches, and the press-and-slide action lays it down in one controlled motion instead of you lowering it by hand and chasing air pockets. Clean the screen with the included kit first so no dust is sealed in, follow the three printed steps, and the fit takes about 30 seconds.

What happens if the protector cracks?
Then it has done its job — the impact went into a replaceable sheet of tempered glass instead of the car's display. Peel the damaged protector off and fit a fresh one; the screen underneath stays unmarked, which is the entire economics of the product: a low-cost shield for a very expensive screen.

Does one pack cover the instrument cluster too?
This product is the protector for the 15.6-inch center screen, supplied as one glass in its alignment tray. That center display is the surface every control in the car runs through, and it is the one this kit protects.

Can I remove it later without residue?
Yes. Lift one corner with a fingernail or the squeegee card and peel the glass away slowly — the bond releases cleanly from the display, leaving the original screen surface as it was.

Standard worldwide shipping is $9.90 USD on orders below $29.90 USD. Orders of $29.90 USD or more ship free with standard shipping. Return requests can be submitted within 30 days after delivery — see our Returns & Refunds policy for the full terms.

BYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.