Rear Air Conditioning Vent Cover Kit for BYD SEALION 7 – 4-Piece Console Back Trim

The back of your SEALION 7's front console takes a beating — rear passengers' shoes scuff the lower panel every trip, and the plain black plastic around the rear air vents shows every mark. This four-piece kit armours the whole area and finishes it in your choice of carbon fiber style, black or orange.

The kit covers the complete rear face of the front centre console: a frame that wraps the twin rear air vents, a full lower anti-kick panel with the storage pocket opening cut out, and the matching small plates for the panel blank beneath the vents. Every piece is molded to the SEALION 7's console shape and sticks on with pre-applied automotive adhesive. The vents keep working exactly as before — outlets, adjustment dials and the storage pocket all stay fully accessible through the shaped cutouts.

• The anti-kick panel ends shoe damage — the lower console back sits exactly where rear passengers rest their feet. The large cover panel takes the kicks, scuffs and sole marks (shown in the shoe photo) so the factory trim underneath stays unmarked. Wipe the cover clean and it looks new again.
• Full coverage, not a token frame — vent frame, lower panel and both small plates are in the box. The whole rear face of the console is protected and colour-finished in one fitting session, with no mismatched pieces bought separately.
• Three finishes, three different cabins — pick the look that belongs in your car (each variant is detailed below). The pieces are shaped identically; only the finish changes.
• Cutouts in all the right places — both vent outlets, the vent adjustment area, the blank plate under the vents and the storage pocket all have their own openings. Nothing is covered over, blocked or glued shut.
• Peel, align, press — automotive adhesive tape is pre-applied to every piece (shown in the back-view photo). No drilling, no clips, no console disassembly.

• Carbon Fiber: gloss carbon-fiber-style weave over the full set. The sportiest option — it picks up the light across the vent frame and lower panel and pairs with carbon-style trim elsewhere in the cabin. This is the finish fitted in the lead photos.
• Black: a clean matte black that disappears into the factory console. Choose it when you want the protection with zero visual change — from the rear seats the console simply looks original, but every scuff now lands on the cover instead of the trim.
• Orange: a matte tan-orange matched to the SEALION 7's orange interior, as shown fitted in the orange-cabin photos. It turns the console back into a deliberate colour feature that ties the front and rear cabins together — and it hides dust and shoe marks better than any other finish here.

• Construction: rigid ABS pieces, molded to the console's curves so the edges sit flush with no gaps or lifting corners.
• Vent frame: wraps both rear outlets and the centre divider, with the adjustment dials left open and working.
• Anti-kick lower panel: the largest piece — it covers the full lower console back and has the storage pocket opening cut into it, so the pocket stays usable with the cover fitted.
• Small plates: matching covers for the rectangular blank below the vents and the narrow panel strip, completing the finished look.
• Bonding: pre-applied adhesive strips run along the edges of every piece, as shown in the back-view photo.

• Vehicle: BYD SEALION 7 (also sold as Sea Lion 07 EV)
• Position: rear face of the front centre console, facing the rear seats
• Contents: 4 pieces — rear vent frame, anti-kick lower panel, vent blank plate, trim strip
• Finishes: Carbon Fiber · Black · Orange (choose above)
• Airflow: the vent outlets are framed, never covered — rear heating and cooling output is unchanged

1. Wipe down the whole rear face of the console with a clean cloth and an alcohol prep pad. The plastic must be dry and free of interior dressing or silicone shine products.
2. Hold each piece against the console before peeling anything — the molded shapes key into place, so you can confirm every position first. Start with the vent frame, then the lower anti-kick panel, then the two small plates.
3. Peel the tape backing, align the piece, and press it home edge to edge with firm hand pressure for 30–60 seconds per piece.
4. Keep interior cleaners off the pieces for 24 hours while the adhesive reaches full strength. After that, wipe them clean like any other cabin trim.

• Material: ABS
• Finishes: carbon fiber style gloss weave · matte black · matte orange
• Attachment: pre-applied automotive adhesive tape on all pieces
• In the box: 4 × console-back trim pieces in your chosen finish
• Care: wipe with a damp microfiber cloth; the covers take the cleaning that would otherwise wear the factory trim

What exactly does the kit cover?
The complete rear face of the front centre console: the frame around the twin rear air vents, the large lower panel behind the front seats (the part passengers kick), the small rectangular blank under the vents, and the narrow trim strip. The flat-lay photo shows all four pieces.

Do the rear air vents still work with the frame fitted?
Yes, completely. The frame surrounds the outlets and leaves both vents and their adjustment dials open — you direct and close the airflow exactly as before, and heating and cooling output to the rear seats is unchanged.

Can I still use the storage pocket in the console back?
Yes. The lower anti-kick panel has the pocket opening cut into it, so the pocket stays open and usable with the cover in place.

What is the difference between the three variants?
Finish only. Carbon Fiber is a gloss carbon-style weave, Black is matte black that blends into the original console, and Orange is the matte tan-orange that matches the SEALION 7's orange interior. The shaping, coverage and fitting are identical across all three.

How does it attach — will it damage the console?
Every piece bonds on with pre-applied automotive adhesive tape. Nothing is drilled, clipped or cut. Warmed gently, the pieces can be lifted away and any tape residue rolled off, leaving the factory console as it was — the cover protects the trim precisely because it takes the wear instead.

Is the carbon fiber finish real carbon?
It is a carbon-fiber-style finish on rigid ABS — the same construction used across the SEALION 7 trim range. You get the deep gloss weave look with the exact molded fit of ABS, at an accessory price rather than a laid-carbon price.

Does it fit right-hand-drive cars?
Yes. The rear console face is the same shape on left- and right-hand-drive SEALION 7s, and this kit is shaped for that shared console.

Standard worldwide shipping is $9.90 USD on orders below $29.90 USD. Orders of $29.90 USD or more ship free with standard shipping. Return requests can be submitted within 30 days after delivery — see our Returns & Refunds policy for the full terms.

BYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.