TPE Floor Mats for BYD ATTO 2 EV (2025+) – 3-Piece 3D-Molded All-Weather Set

The ATTO 2 is the car you take everywhere — commute, school gate, trailhead car park. Its carpet is not built for that life. This 3-piece TPE set is molded from the 2025+ ATTO 2 floor itself, so every tray lands exactly where it belongs and turns the cabin floor into a rinse-clean surface.

Three pieces cover the whole cabin: a deep driver tray shaped around the pedal box and footrest, the matching front passenger tray, and a one-piece rear tray that runs the full width of the back floor. Both front trays carry the round retention points that lock onto the car's own floor anchors — the anti-slip retention system in the photos — so the mats cannot creep forward under your heels. Diagonal channels sweep water and grit away from your shoes, and the raised walls keep it all in the tray until cleaning day.

• Precision 3D-molded, model-year correct — this set is shaped for the 2025+ ATTO 2 (the compact SUV also sold as the YUAN UP). The footwell walls, tunnel width and seat-rail positions of that floor are baked into every tray — it is a molding of your car's floor, not a size class.
• They lock down — front trays engage the factory retention anchors and the molded shape fills each footwell wall to wall. No sliding, no bunching under the pedals, no curled corners catching your heel.
• Pedals stay fully clear — the driver tray is cut and molded around the pedal box and the dead pedal, with the pedal travel zone left open, as the installed photos show from the driver's seat.
• Built for real mess — the feature panels tell the story: crumbs and grit sit in the channels instead of grinding into carpet, water beads on the waterproof surface, and shoe soles grip the textured pattern instead of skating on a wet mat.
• One-piece rear, full width — the back floor gets a single molding that spans both footwells and the center, so rear passengers' mud stays on TPE and the middle strip of carpet is covered too.

• Diagonal channel pattern: the swept grooves molded across each tray move water away from the heel area and give the surface its all-weather grip.
• High molded walls: every tray turns up at the edges to form a containment lip that follows the footwell's own contours, including up the firewall side of the front trays.
• Retention anchor points: the circular fittings visible on the front trays are positioned for the ATTO 2's floor anchors — press down and the tray is locked, lift and it releases for cleaning.
• Fine grain TPE finish: a pebbled, matte texture that matches the car's interior plastics, hides scuffs, and wipes clean without streaking.

• Driver floor tray × 1 — molded around the pedal box and footrest, with retention anchor points
• Front passenger floor tray × 1 — full footwell coverage with retention anchor points
• Rear floor tray × 1 — one-piece, full-width coverage for both rear footwells and the center section
• That is the entire cabin floor in a single set — there are no other pieces to add later.

• Vehicle: BYD ATTO 2 EV (also sold as BYD YUAN UP)
• Model years: 2025 and onward (2025+)
• Positions: driver, front passenger and rear cabin footwells
• Quantity: 3-piece set

1. Remove the original carpet mats and vacuum the footwells.
2. Set the front trays in and press the retention points down onto the floor anchors until each one seats — the tray is then locked in place.
3. Lay the one-piece rear tray across the back floor, settling it around the seat rails and center console rear.
4. Press around every edge so the molded walls sit flush against the footwell sides.
5. To clean: release the anchors, lift the trays out, hose or wipe them down, shake dry and click them back in.

• Material: TPE (thermoplastic elastomer)
• Color: black
• Fit: precision 3D-molded for the 2025+ BYD ATTO 2 / YUAN UP cabin floor
• Set contents: 3 pieces — driver tray, front passenger tray, one-piece rear tray
• Retention: front trays engage the factory floor anchors
• Care: hose down or wipe clean; waterproof, dirt-resistant and slip-resistant

Is this set for the ATTO 2 or the YUAN UP?
Both — they are the same car. The ATTO 2 is the export name for the compact SUV sold in China as the YUAN UP, and this set is molded for that shared 2025+ floor. Order it for either badge.

Does the set include a trunk mat?
This set is the complete cabin system: driver, front passenger and rear trays — three pieces. The boot is a separate area with its own liner options; everything inside the cabin, wall to wall, is covered by what is in this box.

Can the driver mat slide under the pedals?
No. Two things stop it: the tray is a wall-to-wall molding of the footwell itself, and its retention points lock onto the car's factory floor anchors. The pedal zone is molded clear, and the mat stays in that position — the stay-put design is shown step by step in the product photos.

Why are the front trays shaped differently from each other?
Because the footwells are different. The driver side is molded around the pedal box, footrest and anchor positions on that side; the passenger side mirrors its own footwell. That asymmetry is the visible proof the set is molded for this car rather than trimmed from a universal blank.

How do I clean off dried mud and salt?
Release the trays from their anchors, lift them out and hose them down — the non-porous TPE surface releases dried mud and road salt in one rinse. Shake off the water and click them back in; there is no fabric to dry out.

Do the mats have a rubber smell?
No. TPE is an odorless material, so the set goes in without the new-rubber smell that cheaper mats bring into a closed cabin, and it stays that way in summer heat.

Standard worldwide shipping is $9.90 USD on orders below $29.90 USD. Orders of $29.90 USD or more ship free with standard shipping. Return requests can be submitted within 30 days after delivery — see our Returns & Refunds policy for the full terms.

BYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.