{"product_id":"tailgate-switch-trim-cover-for-byd-seal","title":"Tailgate Switch Trim Cover for BYD SEAL – Carbon Fiber Style ABS Frame","description":"\u003cp\u003e\u003cstrong\u003eEvery time you pop the SEAL's tailgate, your fingers land on the same plain black corner of the driver's door. This frame wraps that tailgate switch in gloss carbon weave — a two-minute detail that makes the whole door card look finished.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe cover is a rigid ABS frame shaped to the exact rectangle of the SEAL's electric tailgate switch housing on the driver's door, just ahead of the speaker grille. Its open window leaves the switch and its pull tab completely exposed, so the tailgate works exactly as before — the frame simply gives the switch a carbon fiber style border with a deep, glossy weave that matches the SEAL's other carbon-look cabin trim.\u003c\/p\u003e\n\u003ch2\u003eWhy SEAL owners fit it\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt frames the switch, not covers it\u003c\/strong\u003e — the window in the middle of the frame is cut to the switch housing, so the pull tab, the tailgate icon and the switch travel are all untouched. You pull the switch through the frame, not around it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss carbon weave, honestly described\u003c\/strong\u003e — the frame is ABS with a carbon fiber style finish applied by water-transfer printing and sealed under a gloss coat. Up close the weave is crisp and even, with the same checker pattern shown in the photos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIt protects a fingernail zone\u003c\/strong\u003e — the painted trim around the tailgate switch is exactly where nails and rings scrape every time the boot is opened. The frame takes that contact instead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-taped and peel-and-stick\u003c\/strong\u003e — adhesive tape strips are already applied around the back of the frame. Clean the door trim, peel the backing, align the window over the switch and press — no clips, no screws, no trim removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTies the cabin together\u003c\/strong\u003e — the SEAL's interior already uses carbon-style accents; this puts the same finish on a switch surround BYD left plain black.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExact fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e BYD SEAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel years:\u003c\/strong\u003e 2022, 2023 and 2024\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e around the electric tailgate switch on the driver's door card, ahead of the door speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 frame — the SEAL has one interior tailgate switch, and one frame finishes it\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting it — one clean press\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eWipe the trim around the tailgate switch with a damp microfiber and let it dry fully; the surface must be free of dust and interior dressing.\u003c\/li\u003e\n\u003cli\u003eHold the frame over the switch without peeling the backing and note the alignment — the window keys around the switch housing in only one position.\u003c\/li\u003e\n\u003cli\u003ePeel the backing from the tape strips on the rear of the frame, align the window over the switch, and press the frame home around all four edges for 20–30 seconds.\u003c\/li\u003e\n\u003cli\u003ePull the tailgate switch a few times to feel the unchanged action. Full adhesive strength builds over the first 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e rigid ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e carbon fiber style water-transfer print, gloss clear coat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e black \/ grey carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e pre-applied adhesive tape strips on the rear face\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 × tailgate switch trim frame for BYD SEAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare:\u003c\/strong\u003e wipe with a damp microfiber; the gloss coat cleans like the car's other piano trim\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs it real carbon fiber?\u003c\/strong\u003e\u003cbr\u003eIt is genuine ABS carrying a carbon fiber style finish, created by water-transfer printing and sealed under a glossy clear coat. You get the deep checker weave of carbon fiber in a lightweight frame that costs a fraction of a laid-carbon part — and it will not yellow or delaminate the way cheap printed stickers do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the frame get in the way of the switch?\u003c\/strong\u003e\u003cbr\u003eNo. The center of the frame is an open window sized to the switch housing: the switch and its pull tab sit inside the window and move exactly as they did before the frame was fitted. The fitted photos show the switch in use with the frame in place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich door does it go on?\u003c\/strong\u003e\u003cbr\u003eThe driver's door — that is where the SEAL's interior tailgate switch lives, low on the door card ahead of the speaker grille. The switch housing is the same part on left- and right-hand-drive cars, and the frame fits it either way.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow does it attach — will it fall off?\u003c\/strong\u003e\u003cbr\u003eFour adhesive tape strips are pre-applied across the back of the frame, giving a continuous bond around the switch rather than a single dab of glue. Fitted to a clean, dressing-free surface and pressed home, it stays flat and fixed; interior heat does not soften this grade of trim tape.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I remove it later?\u003c\/strong\u003e\u003cbr\u003eYes. Warm the frame gently with a hair dryer to soften the tape, ease it away from one corner, and roll off any residue with your thumb. Nothing was drilled or clipped, so the door trim returns to standard.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it match the SEAL's other carbon-look trim?\u003c\/strong\u003e\u003cbr\u003eYes — the gloss checker weave is the same style of finish BYD uses for the car's carbon-effect interior accents, which is why the fitted frame reads as a factory detail rather than an add-on.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; returns\u003c\/h2\u003e\n\u003cp\u003eStandard worldwide shipping is $9.90 USD on orders below $29.90 USD. Orders of $29.90 USD or more ship free with standard shipping. Return requests can be submitted within 30 days after delivery — see our \u003ca href=\"\/pt\/pages\/returns-refunds\"\u003eReturns \u0026amp; Refunds\u003c\/a\u003e policy for the full terms.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eBYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.\u003c\/small\u003e\u003c\/p\u003e\n","brand":"BYD SPOT","offers":[{"title":"Default Title","offer_id":45338920058995,"sku":"BYDSPOT-01830-01","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/3785\/9443\/files\/01-installed-and-product.jpg?v=1793058897","url":"https:\/\/bydspot.com\/pt\/products\/tailgate-switch-trim-cover-for-byd-seal","provider":"BYD SPOT","version":"1.0","type":"link"}