{"product_id":"mud-flaps-for-byd-shark-6","title":"Mud Flaps for BYD SHARK 6 Pickup – 4-Piece Flat Flap Set with Tire-Track Graphic","description":"\u003cp\u003e\u003cstrong\u003eA dual-cab ute on all-terrain tires is a stone-throwing machine — gravel, mud and road grit blast the sills, doors, tub sides and anything on the tow bar. These wide flat mud flaps are the heavy-coverage answer built for the BYD SHARK 6.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUnlike the small molded cups made for hatchbacks, this is a set of 4 full-size flat flaps — front pair and rear pair — cut for the SHARK 6's arches, pre-drilled with multiple fixing points and screwed firmly to the arch and liner. Each flap carries a bold white tire-track graphic across its face. Mounting screws and a screwdriver are included in the kit.\u003c\/p\u003e\n\u003ch2\u003eWhy SHARK 6 owners fit them\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage a pickup actually needs\u003c\/strong\u003e — the SHARK 6's wide all-terrain tires sit at the corners of a tall body-on-frame truck and throw debris in a wide fan. A broad flat blade covers that fan in a way a small contoured flap cannot, protecting the doors, side steps, tub and rear bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtects what you tow\u003c\/strong\u003e — rear flaps are not just about the truck: they cut the stone spray that otherwise peppers a boat, camper or box trailer behind you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat and flexible beats rigid off-road\u003c\/strong\u003e — on gravel tracks and rutted ground a rigid molded flap is a lever waiting to be torn off. A thick flexible sheet bends over rocks, ruts and breakover angles and springs back — that is why flat flaps are the off-road standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-point screw fixing\u003c\/strong\u003e — every flap is pre-drilled along its edges and screwed at multiple points (the fixing screws are highlighted in the installed photos), so there is no single clip to pop and no flapping at highway speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLooks the part\u003c\/strong\u003e — matte black with a distressed white tire-track print, sized to fill the arch of a lifted dual-cab. On the truck they read as proper 4WD gear, not an afterthought.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDesign details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e thick, flexible PP sheet, matte black — chosen for impact flex and weather resistance; it will not crack in cold weather or go brittle in tropical sun.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShape:\u003c\/strong\u003e tall arch-cut profile with a curved top that follows the SHARK 6's wheel-arch opening and a wide, straight drop blade; front and rear pairs are different profiles, as the full-set photo shows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphic:\u003c\/strong\u003e a white tire-track tread print runs across the lower face of every flap — it is part of the flap's printed design and is identical across the set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing points:\u003c\/strong\u003e multiple pre-drilled holes around the mounting edges on every flap — no measuring or drilling of the flaps themselves; you screw through the holes provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExact fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e BYD SHARK 6 dual-cab pickup (DMO plug-in hybrid) — sold as BYD SHARK in some markets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel years:\u003c\/strong\u003e 2024, 2025 and 2026\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e behind all four wheels — front pair and rear pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 flaps — one complete truck set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting them\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eSort the set into the front pair and rear pair — the profiles differ, as shown in the full-set photo. Clean the arch and liner area where each flap will sit.\u003c\/li\u003e\n\u003cli\u003eHold the flap in position in the arch, centered behind the tire, and mark the fixing points through the pre-drilled holes.\u003c\/li\u003e\n\u003cli\u003eScrew the flap to the arch\/liner fixing surface through the provided holes, working across all points so the sheet pulls down flat and even — the installed photos show the multi-screw result.\u003c\/li\u003e\n\u003cli\u003eCheck clearance at full steering lock at the front and confirm the bottom edge hangs straight. Repeat at all four corners. The included screwdriver covers the whole job; turning the front wheels gives you room to work with the wheels on.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e flexible PP sheet, matte black with white tire-track graphic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e screws at multiple pre-drilled points per flap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 4 × mud flaps (front pair + rear pair) + mounting screws + screwdriver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare:\u003c\/strong\u003e hose or pressure-wash mud straight off; the flat face has no recesses to trap grit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhy flat flaps instead of molded ones?\u003c\/strong\u003e\u003cbr\u003eCoverage and survival. The SHARK 6 is a tall, body-on-frame ute on all-terrain tires: it needs a wide blade to cover the spray fan, and it needs that blade to flex when it drags over a rut or a rock. Molded cups are prettier on a hatchback; flat flexible flaps are what working 4WDs use, for good reason.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the white graphic on all four flaps?\u003c\/strong\u003e\u003cbr\u003eYes. Every flap in the set carries the same distressed white tire-track print across its lower face — front pair and rear pair, as the full-set photo shows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the flaps pre-drilled?\u003c\/strong\u003e\u003cbr\u003eYes — the fixing holes are already punched around the mounting edges of every flap, and the screws are in the box. You position the flap in the arch and screw it home; there is no drilling of the flaps and no measuring out hole patterns.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they work with side steps fitted?\u003c\/strong\u003e\u003cbr\u003eThe front flaps mount inside the arch behind the tire and sit forward of the step's front end — the installed photo shows a front flap working alongside the factory side step. The blade hangs in the wheel's spray path, not across the step.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do they handle gravel roads at speed?\u003c\/strong\u003e\u003cbr\u003eThat is their home ground. The multi-point screw fixing keeps the sheet planted with no flapping, the flexible PP absorbs stone strikes instead of chipping, and the wide blade is exactly what keeps gravel off your sills, tub and trailer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo they fit the SHARK sold outside Australia?\u003c\/strong\u003e\u003cbr\u003eYes — SHARK 6 and the trucks sold simply as BYD SHARK in markets such as Mexico and Brazil are the same dual-cab DMO pickup with the same arches. This set is cut for that truck.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; returns\u003c\/h2\u003e\n\u003cp\u003eThis set is $69.99 USD — over the $29.90 USD threshold, so standard worldwide shipping is free. (For smaller orders, standard shipping is $9.90 USD below the threshold.) Return requests can be submitted within 30 days after delivery — see our \u003ca href=\"\/ja\/pages\/returns-refunds\"\u003eReturns \u0026amp; Refunds\u003c\/a\u003e policy for the full terms.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eBYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.\u003c\/small\u003e\u003c\/p\u003e\n","brand":"BYD SPOT","offers":[{"title":"Default Title","offer_id":45338911244403,"sku":"BYDSPOT-00167-01","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/3785\/9443\/files\/01_88ca9f25-e740-496e-8ba5-a6a836ecd0be.jpg?v=1793058644","url":"https:\/\/bydspot.com\/ja\/products\/mud-flaps-for-byd-shark-6","provider":"BYD SPOT","version":"1.0","type":"link"}