{"product_id":"mud-flaps-for-byd-atto-1","title":"Mud Flaps for BYD ATTO 1 \/ Seagull – 4-Piece Set with Fitting Kit","description":"\u003cp\u003e\u003cstrong\u003eThe ATTO 1 is a city car that lives in city mess — wet streets, gravel car parks, muddy kerbs. Without mud flaps, all of it lands on your doors, sills and rear bumper. This 4-piece set is molded for the Seagull \/ ATTO 1 body and bolts on with the hardware in the box.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOne set covers all four wheels: front left, front right, rear left and rear right. Each flap follows the little hatchback's arch and sill contours exactly, fixes through the factory arch points with the supplied clips and screws, and flexes instead of cracking when it meets a speed bump or a kerb.\u003c\/p\u003e\n\u003ch2\u003eWhy ATTO 1 owners fit them\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaner doors, less washing\u003c\/strong\u003e — the front wheels are the worst offenders on a short-wheelbase hatch: everything they pick up is sprayed straight down the doors. These flaps cut that spray off at the wheel, so the sides of the car stay presentable between washes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaint protection on thin city panels\u003c\/strong\u003e — grit and small stones thrown at the sill and rear bumper chip paint fast. A flexible flap in the spray path is cheap armor for the panels that are most expensive to repaint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaped for the Seagull body\u003c\/strong\u003e — this is not a universal sheet cut to size. The mounting face is molded with the steps, clip slots and screw positions of the Seagull \/ ATTO 1 arch, which is why the fitted photos show the flaps sitting flush with no gaps or flapping edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEverything you need is in the box\u003c\/strong\u003e — push rivets, metal U-clips, screws and the Z-shaped offset wrench are all included (shown laid out in the photos). The offset wrench exists for one reason: it reaches the arch screws with the wheels still on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft where it counts\u003c\/strong\u003e — the bend photo is real: the PP flexes in your hands. Brush a high kerb or a steep driveway ramp and the flap gives, then returns to shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDesign details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PP (polypropylene) soft plastic, matte black, UV-stabilized — the standard OEM material class for splash guards, stable from winter cold (−30°C) to summer heat (80°C).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured mounting face:\u003c\/strong\u003e the back of each flap carries the arch's shape, with molded clip slots and a screw boss positioned at the factory fixing points highlighted in the close-up photos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean outer face:\u003c\/strong\u003e smooth matte black with no logos or graphics — it blends into the ATTO 1's black arch and sill trim and looks like it came with the car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSized for a small hatch:\u003c\/strong\u003e the drop length is proportioned to the ATTO 1's ride height and short overhangs, giving full spray coverage without dragging.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eExact fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle:\u003c\/strong\u003e BYD ATTO 1 — the export name for the BYD Seagull (also sold as Dolphin Mini in Latin America and Haiou in China)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel years:\u003c\/strong\u003e 2023, 2024, 2025 and 2026 (pre-facelift body)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e behind all four wheels — front pair and rear pair, left and right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e the standard BYD Dolphin — a larger car with different arches. This set is Seagull \/ ATTO 1 only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 flaps — one complete car set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting them\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eLay the four flaps out and match each to its corner — the molded shapes are position-specific and only sit flush in the right place. Wipe the arch fixing area clean.\u003c\/li\u003e\n\u003cli\u003eOffer the flap up to the arch and engage the molded clip slots onto the arch fixing points.\u003c\/li\u003e\n\u003cli\u003eFit the supplied U-clips and screws at the marked points and drive them home with the included Z-wrench, snug and even — the wrench's offset shape is made for the tight gap between tire and arch.\u003c\/li\u003e\n\u003cli\u003eAt the front, turn the steering to full lock for easy access; the wheels stay on at all four corners. Repeat around the car and give each flap a firm tug to confirm it is locked in.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PP soft plastic, matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment:\u003c\/strong\u003e factory arch fixing points — push rivets, U-clips and screws, all included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 4 × mud flaps (front pair + rear pair) + rivet and clip set + screws + Z-shaped offset wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCare:\u003c\/strong\u003e hose off mud and salt; the smooth PP face rinses clean and needs no dressing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs the ATTO 1 the same car as the Seagull?\u003c\/strong\u003e\u003cbr\u003eYes. ATTO 1 is the name BYD uses for the Seagull in markets such as Indonesia and Thailand; the car is also sold as the Dolphin Mini in Latin America. The body and wheel arches are the same, and this one set is molded for that shared body.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit my BYD Dolphin?\u003c\/strong\u003e\u003cbr\u003eNo — and that distinction matters. The Dolphin is a bigger car with different wheel arches, and its flaps are a different molding (we list the Dolphin sets separately, including the 2025+ facelift version). This set is for the Seagull \/ ATTO 1 \/ Dolphin Mini only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to drill or take the wheels off?\u003c\/strong\u003e\u003cbr\u003eNeither. The flaps mount at the factory arch points using the rivets, U-clips and screws in the box, and the included Z-wrench is shaped specifically to reach those screws with the wheels on — turn the front wheels to full lock and there is room to work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy does the set include so much hardware?\u003c\/strong\u003e\u003cbr\u003eBecause each corner uses the fixing mix that position calls for — push rivets at some points, U-clip and screw at others — rather than forcing one fastener type everywhere. The hardware photo shows exactly what arrives: rivets, U-clips, screws and the wrench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill they survive speed bumps and steep driveways?\u003c\/strong\u003e\u003cbr\u003eYes. The flaps are soft PP and demonstrably bendy — the product photos show one flexed by hand. A brush with a bump flexes the flap instead of snapping it, and the drop length is sized for the ATTO 1's standard ride height.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMy car is a 2025 ATTO 1 — does the year matter?\u003c\/strong\u003e\u003cbr\u003eATTO 1 cars are the pre-facelift Seagull body in every market, and that is the body this set is molded for, 2023 through 2026. If your car is the Seagull-shaped hatchback, this is its set.\u003c\/p\u003e\n\u003ch2\u003eShipping \u0026amp; returns\u003c\/h2\u003e\n\u003cp\u003eThis set is $39.99 USD — over the $29.90 USD threshold, so standard worldwide shipping is free. (For smaller orders, standard shipping is $9.90 USD below the threshold.) Return requests can be submitted within 30 days after delivery — see our \u003ca href=\"\/de\/pages\/returns-refunds\"\u003eReturns \u0026amp; Refunds\u003c\/a\u003e policy for the full terms.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eBYD SPOT is an independent accessories retailer and is not affiliated with, endorsed by, or sponsored by BYD Company Limited. Vehicle names and trademarks are used solely to identify product compatibility.\u003c\/small\u003e\u003c\/p\u003e\n","brand":"BYD SPOT","offers":[{"title":"Seagull","offer_id":45338910163059,"sku":"BYDSPOT-01165-02","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/3785\/9443\/files\/01_e491aa27-cb80-4e6a-8f43-4bf0a88df94a.jpg?v=1793058585","url":"https:\/\/bydspot.com\/de\/products\/mud-flaps-for-byd-atto-1","provider":"BYD SPOT","version":"1.0","type":"link"}